Reducing Shrink is Pure Profit!
  Humidifiers and Air Purification / Ethylene Scrubbers for Refrigerated Warehouses, Cold Stores, & Controlled Atmosphere


Details and More Info

  Buy Online! Webstore Open.
  Sizes and Capacities
  Scrubbers for CA Storage
  Ethylene Degradation Study
  Ozone Safety Information
  Compare Technologies
  Damage Caused by Ethylene
  Ethylene Research
  -----------------------------------
 

If your net profit now is 4%, and you reduce shrink by 1% of sales, you've increased profits by 25% (less the amortized and operating costs of your system improvements, of course.) It is not unusual for investments in humidifiers and air purifiers to generate ROI/Payback in 12 months or less.
Humidifiers and Ethylene Scrubbers just make sense.

Humidifier Information

Our patented Ultrasonic Humidifiers are designed for space-saving humidification and replacement of centrifugal and steam canister humidifiers.

Units are available in both nozzled and open discharge configurations.

ULTRASONIC HUMIDIFIER MODELS/CONFIGURATION

CONFIGURATION ULTASONIC SERIES
MODEL UH-5 UH-15 UH-18 UH-25 UH-70 UH-100
CAPACITY (#/HR) 5 15 18 25 70 100
DIMENSIONS L"xD"xH" 9x14x12.5 21x14x12.5 21.5x16x13 29x16x13 60x24x90 tbd
WEIGHT (lbs) 10 16 28 42 350 tbd
VOLTAGE/POWER (watts) 120/140 120/420 120/490 120/700 277/1920 tbd


Specifications

Ultrasonic humidifier Specifications
Humidifier module and Master Panel:

The humidifier shall be a packaged, self-contained ultrasonic humidifier using the principle of ultrasonic nebulization. Each humidifier shall use a multiple of ultrasonic transducers that vibrate at approximately 1.6 megahertz, producing a droplet size of approximately 1 micron. Each transducer circuit shall use the “thickness vibration method” of humidification via a piezoelectric converter. The ultrasonic transducers shall convert the electric energy into mechanical energy, causing the water to cavitate, resulting in the production on one micron sized water particles. The design of the humidifier housing shall prevent larger droplets from leaving the humidifier assembly.

The humidifier shall consume no more than 33 watts per pound of humidification generated.

The ultrasonic humidifier shall not produce any unacceptable noise. The sound level shall not exceed 50 db at 5 feet from the humidifier module.

The ultrasonic humidifier shall not require a flush cycle and shall have instant on and off operation in order to maintain precise room relative humidity.

The humidifier housing and discharge nozzles shall be made of ABS plastic and high grade stainless steel.
The system shall be pre-wired with quick connects provided to connect the Master Panel to the humidifier module.

The Master Panel will be provided with:
- pre-wired humidistat with 10’cord
- 7’ power cord with 120 volt receptacle
- 12 power/control cord to connect the Master Panel to the humidifier

Each humidifier shall have the following components:
Solenoid valve to control water flow into the humidifier;
Float switch to control water level;
Float switch to provide for low water shutdown;
Piezoelectric crystals (transducers);
On/off humidistat.


  Home | Humidifiers | Scrubbers | About Us | Contact Us | FAQs | Links | Sitemap  

 

Copyright 2011. Global Cooling Inc.
Site Develop by Global Associates